Onboarding questions and why they are asked
Reviewed November 8, 20267 min read
On this page
Onboarding is five short questions, one per screen, plus a second equipment screen to check what you have. Each answer changes your training in a specific way, and every one can be changed later.
1. Goal
Choose one training goal:
- Goal
- Hypertrophy
- What it means for your sessions
- Building muscle: moderate loads and higher reps, stopped a few reps short of failure.
- Goal
- Strength
- What it means for your sessions
- Heavier main lifts in lower rep ranges, with longer rest.
- Goal
- Powerlifting
- What it means for your sessions
- Squat, bench press and deadlift. From Some experience up, built around a heavy top set and lighter back-off sets. On a pull day, a row, pull-up or pulldown leads instead, at a lighter lift’s reps, with no top set. Needs a barbell setup that can load all three.
- Goal
- Powerbuilding
- What it means for your sessions
- Strength work on the main lifts, muscle-building work around them.
- Goal
- General fitness
- What it means for your sessions
- A balance of strength, muscle and conditioning, in line with public activity guidelines.
- Goal
- Hybrid
- What it means for your sessions
- Lifting and running planned together so they do not undercut each other.
Changing your goal changes exercise choice, rep ranges, effort targets, rest and weekly volume, not just a label. Weight loss, maintenance and gain are separate bodyweight goals in the optional nutrition features.
2. Experience
New, Some or Experienced. This sets how many sets you do, how complex the exercises are, how close to failure sets are taken, and which advanced techniques can be offered. New lifters get no drop sets, rest-pause or other set techniques, and supersets only when time is short. With General fitness, some of their exercises still run as a circuit, and at any level the Forge keeps barbell lifts out of one. If your birth year in You makes you 65 or older, a New plan also leaves out fast, loaded lifts such as swings, cleans and thrusters, and doesn’t offer them under Change exercise or as a stand-in.
3. Schedule
How many days a week you usually train (2 to 6), or It varies, and how long a normal session is (20 to 90 minutes). “It varies” is a real answer: VidarFit plans one session at a time and does not cram missed days into the next one.
With Hypertrophy or Powerbuilding on full-body days (a full-body rotation, or a program of 2 or 3 days a week or for It varies), a session too short for a lower-body lift, a press and a pull gives way in order. First the pull gets a lighter dose, then the press and the pull take turns from session to session. Only after that does the session’s small extra exercise go, and last of all a set of your main lift, which can happen at 20 or 25 minutes. Which step your sessions reach depends on your goal and how long you rest between sets: with Powerbuilding, past a new lifter, the press and the pull can still take turns in sessions of up to 55 minutes. With other goals, the press and the pull share whatever room a full-body session has in the same way, the one that waited longest first. On a full-body or upper-body day, or in a session planned one at a time, an exercise the Forge adds to fill your time is a press only while you’ve done more pulling sets than pressing ones in the last 7 days, counting that session’s own, and a pull only while you haven’t, even when that leaves nothing else to add. If your avoid list rules out every press, or every pull, the other isn’t held back. A workout imported from another app doesn’t count here, as it doesn’t for recovery. A press or a pull that sat out of that session for room, not for its muscles’ maximum, is the exception: that count doesn’t hold it back. Nor does it hold back a favorite on its turn, which comes after your main lift at least once every five sessions with room for it, or one you’ve outgrown as a main lift on a day it would otherwise have led, which keeps a place after your main lift where one fits, unless a favorite on its turn takes the only one: then it sits that session out. In a session planned one at a time, with no rotation or program, the places after the main lift take turns on every goal: the press, the pull, and, when the main lift isn’t a lower-body lift, a squat, a hinge or a lunge. The one that waited longest goes first, except in a Hypertrophy or Powerbuilding session in your first sessions back, which starts from the one you did last. With Strength, Powerlifting, General fitness or Hybrid, though, a press, or a squat, hinge or lunge, whose lifts all work first a muscle already past its planned maximum for the week, counting that session’s own lifts, waits behind the others however long it has waited, at any length and at every level, though the press is never out more than two lifting sessions running. For its place after the main lift, the pull doesn’t wait for its planned maximum, so your pulling keeps pace with your pressing: it waits only when its sets would take a muscle it works past 25 direct sets in 7 days, counting today’s. With Hybrid, the main lift itself takes turns across a squat, a hinge and a row, and a press takes the turn of a squat or hinge you can’t do. In a session with room for your main lift alone, a press takes a turn of its own too once you haven’t pressed for two lifting sessions. A Strength session of 35 minutes or less, or 45 for an experienced lifter, keeps its main lift’s sets first, so the pull can sit out two sessions in a row. With no rotation or program, past a new lifter, it can happen up to 45 minutes, or 50 for an experienced lifter. With Powerlifting or Hybrid, a session of 35 minutes or less has less room. At 20 or 25 minutes it can hold only your main lift. With Powerlifting the pull is then the one that sits out, for weeks at a time. With Hybrid and no rotation or program, the pull is out at most two lifting sessions running, unless a muscle it works is near that limit. Past a new lifter, a session of 25 minutes or less has no press as a secondary lift: the press comes as the session’s small extra exercise or, after two lifting sessions without one, as the main lift in its turn. On a rotation or program, the press and the pull can both sit out for weeks, often on the same day. When the press or the pull sits out, on a full-body day or a session with no program, the session says so and why: another whole exercise doesn’t fit, or the muscle its lifts work first is past its planned maximum or still recovering, which it names, or, for the pull, a muscle it works is near 25 sets in 7 days. On a lighter day or week, or in your first sessions back, a session that ends well short of your time doesn’t say another exercise doesn’t fit: it says its spare time stays free.
4. Equipment
Pick a starting point (full gym, home gym, dumbbells, kettlebells, bodyweight only, or hotel and travel), then confirm or correct what you really have. Weights start in pounds; switch to kilograms here if your gear is metric. See Equipment profiles.
5. Anything to avoid
Movements or body areas to leave out, or Nothing to avoid. These become hard exclusions: no favorite exercise, program or recovery setting can bring them back. VidarFit is not medical care; if an area is painful or injured, follow the advice of the professional treating you.
What VidarFit does not ask up front
These are optional, and each has its own place for when you want it:
- Bodyweight, height and birth year: in You, then Profile and goals. With a bodyweight there, Progress, then Trends also shows a barbell lift’s estimate relative to your bodyweight.
- Body measurements (waist, hips, chest and more, and a body-fat figure you have from a scale or scan): in Fuel, then Bodyweight, once Fuel is on. Bodyweight only is enough.
- Running history: log past runs with their date on Running.
- Food preferences: in the meal planning preferences in Fuel.
- Strength history: comes from the workouts you log, the ones you log afterward for a past date (Progress, then Log a past workout), or an import from another app in Data and privacy. You can also tell VidarFit your usual working weights in You, then Profile and goals: a lift you add there can start near its weight, and a similar new lift starts at about half of what it suggests. They are a starting point, never a record.
Leaving any of them blank is fine: blank means unknown, and VidarFit never fills in a guess as if it were yours.

